Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.6660873
- Product Categories
- UV ultraviolet light
- Glue gun
- Agent immobilization part c..
- Thread locking agent
- Rubber hypoxia (anaerobic w..
- Liquid raw material
- Gel gems
- Polished plastic
- Potting
- Bonding glue
- LED flexible light strip pl..
- Crystal Epoxy flat arc
- Inductor rubber sticky feet
- Epoxy AB glue
- Solutions glue (degumming a..
- Accelerant
- Treatment agent
- 400 Series Quick Adhesive
- UV UV glue
- ASOKLID Gude blink 400 Seri..
- Plastic, glass, crystal met..
- UV ultraviolet lamps
- Plexiglass glue
- Nano-glue the lens
- Nano-electronic positioning..
- E-silicone
- Araldite glue
- Nan Bao glue
- Loctite glue
- 3M glue
- UV equipment and accessories
- Adhesive materials
- Green and red gum
- Glass, crystal stick metal ..
- Electronics applications UV..
- High temperature epoxy stru..
- Red plastic patch
- Anaerobic structural adhesi..
- Thermal grease
- Putty
- Sworn brothers glue
- South glue
- Rain silicone
- Shi Min playing PS
- Aron hair glue
- Philips UV lamp
- Philips UV bulbs
- Domestic UV lamp
- Toshiba UV lamp
- Hitachi UV lamp
- Friendly Links
- Fine Chemicals companies
- Fine Chemicals products
- Fine Chemicals buy leads
- My business card
- China Business News
- My mobile shop
- Solid Adhesives Co., Do..
- Alibaba
- Solid rubber industry w..
- Good adhesive (glue She..
- Oriental supplier
- Shenzhen Municipal Soli..
- National Internet provi..
- Eastern suppliers
- Solid was good adhesive..
Product Name: | G-9000 Single-liquid type epoxy resin adhesive, rubber sticky feet inductor |
Published: | 2010-11-16 |
Product Type: | G-9000 |
Product Description: | I. Introduction: G-9000G (gray plastic) is highly thixotropic, high-viscosity liquid epoxy adhesive single, also called gray plastic. Temperature 120 ℃ / hour fully cured, the curing process does not sag. After curing, the adhesive strength and excellent mechanical strength; good electrical performance and can withstand changes in temperature, and Song Rao tear strip stress. For electronic products, metal products, electronic components and inductor coil and then, especially recommended for inductors sticky feet. Second, the traits: Color: gray or other colors Viscosity: (25 ℃) 1.7 ~ 2 × 105 CPS Gravity: (25 ℃) × 1.45 ~ 1.5 Third, the curing conditions: Temperature gel time setting time 200 ℃ 1 minute 30 seconds 5 minutes 30 seconds 180 ℃ 2 minutes 30 seconds 11 minutes 30 seconds 150 ℃ 5 minutes 22 minutes 20 seconds 120 ℃ 7 hours 60 minutes Fourth, curing characteristics: Hardness: Shore D 85 Shrinkage:% <0.12 Resistance to soldering heat: seconds (450 ℃ tin liquid) 3 Withstanding Voltage: KV / mm 20 ~ 23 Tensile strength: kg/cm2 200 ~ 220 Volume resistance: ohm-cm 2 × 1016 Surface resistance: ohm 1.5 × 1015 Heat deflection temperature: ℃> 200 |
Admin>>>
You are the 2915514 visitor
Copyright © GuangDong ICP No. 10089450, Solid was adhesive (glue Shenzhen) Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 2915514 visitor
Copyright © GuangDong ICP No. 10089450, Solid was adhesive (glue Shenzhen) Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility